How to add a wireless printer in OS X Mountain Lion
Description: This tutorial will show you how to add a wireless printer to your Apple computer in the OS X Mountain Lion operating system. This is a general guide to how to set up a printer and will often times require a CD that came with the printer to start/finish the installation.
- Put the disc that came with the printer into your computer.
- Run through the set up. When it comes to the point where it asks about connection options, make sure to choose the option that says
Network (Ethernet/Wireless) - Connect the printer to the same network as this computer.
- The easiest way to get your printer connected to your wireless network is to hook it up to a computer that is on the wireless network already. After choosing the above option you should have an option on whether you want to type the wireless information in manually or if you want to let the computer do it. If you choose that you want the computer to do it, you will now need to plug the printer into the computer using a USB cord. Continue on with the installation.
- After the installation is done, the printer will be on the network. You can now unplug the USB cord from the printer and it is ready for use!
For more assistance contact Technical Support here.
Disclaimer: This information is being provided to you as a service from the Technical Support Department. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should contact the Technical Support Department directly. The Technical Support Department will not be held responsible for any loss of information, data or programming as a result of the use of this article.