How to clone your MAC Address on a Tenda Router
Description: Some ISPS require end users' MAC address to access their network. This article will show you how to clone your computers MAC address to your Tenda router.
- Open up a browser
- Type in the IP Address of your router (usually
- Type in the username and password to log in to your router (usually
- Select Advanced Settings on the menu on the left side
- Select MAC Address Clone from menu
- Select Clone MAC Address
- Click Apply
For more assistance contact Technical Support here.
Disclaimer: This information is being provided to you as a service from the Technical Support Department. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should contact the Technical Support Department directly. The Technical Support Department will not be held responsible for any loss of information, data or programming as a result of the use of this article.